Description

The INT-MP001 unit is intended for detection and finding eavesdropping electronic devices. It can reveal both natural and artificial types of concealed surveillance and information leakage.

Both of the solutions can detect a range of eavesdropping electronics used for covert surveillance:

• RF microphones, surveillance cameras, cellular phones and modems using 2G(GSM)/3G(UMTS)/DECT/CDMA
• Through wall listening devices
• 4G(LTE)/5G/WLAN/B-TOOTH bugs
• GPS Tracking units
• Telephone, coaxial, security and fire alarm bugs
• 220V Bugs
• IR and visible RF transmitters
• Cell phones, smartphones in standby mode, digital voice recorders, and more.

Detecting Channels

RF channel

This channel provides the reception and the subsequent processing of radio signals in the frequency range 0.01 – 18000 MHz.

Wire line channel

This channel provides the reception and the subsequent processing of the signals which are transmitted by wires for different purposes (power, telephone, coaxial, computer networks, security and fire alarm systems, etc.

Optical channel

Receiving and processing of the emission in the optical frequency range is provided in this channel.

Acoustical – electrical channel

Receiving, amplifying and analyzing of signals within the frequency range of 10 Hz – 125 kHz is provided in this channel.

For the detection of side electromagnetic emission generated by devices such as digital voice recorder, cell phone, smart phone, etc. intended a magnetic field sensor

The unit has two basic modes of operation

• Portable, using the hardware units included in the set
• Stationary, with the use of dedicated software

Main Unit

The main unit is a simple to use tool that provides easy operation for all functions.

The unit has the following functions

• Can operate in the entire frequency range
• Provides a detailed comprehensive analysis of selected frequencies
• Audio control of the demodulated
• Multisector signal level
• Fully auto detection of signals exceeding the predefined threshold and keeping log in the DB.
• Instantaneous and comprehensive
• Frequency/time scales
• Absolute/relative measures
• PC connectivity with data transfer
• Cellular/wireless data detection indicators
• BTSs signal level detection
• RJ-45 cable auto and manual analysis

Non-linear junction detector functionality

Software

The software can provide the following functions

• Oscilloscope, spectral and vector analysis, “waterfall”;
• Creation of signals database;
• Monitoring with expanded presets;
• Stream recording of signals to HOD of PC;
• Special detection
• PC transfer of data, that has been stored in the main

Wire lines adapter

Is a monoblock in which structurally united:

• Step-down transformer voltage converter assigned to operate in the frequency range from 0.01 to 30 MHz;
• Low frequency differential amplifier assigned for operation in the acoustic frequency range (0.3 – 15 KHz).
• Switching device controlled directly from the main unit and provides connection to the contact pairs of the RJ-45. Connection can be to the most common combinations of pairs as well as user-defined pair.
• Generator of nonlinear junction detector
• Offset voltage supply circuit designed to supply bias voltage (power supply) to the wire line in order to activate the special technical means connected to this line for secretly obtaining information

RF wire line adapter

Is a single monoblock with integrated circuit protection against high voltage up to 250V

Testing device

Is intended to control operability of device by testing all detection channels in the main unit as well as rest equipment (sensors, antennas, adapters, converters). It has six control signal sources corresponding to the detection channels as well as non-linear element to check the non-linear junction detector.

Magnetic field sensor

Consists of a ferrite antenna and pre-amplifier. It operates in two modes:

«MAGNETOMETER”- directly as a magnetic field intensity sensor

“GRADIOMETER” – In this mode an influence of remote strong sources of magnetic field is reduced significantly as well as influence of other disturbing impacts (acoustic, vibro­ acoustic, etc).

SHF antenna-detector

It consists of the structurally integrated log­ periodic antenna and SHF detector-amplifier.

Infrared sensor

This sensor structurally consists of receiving photodiode and pre-amplifier. The front side of sensor has the screw-thread hole 1/4″ used for connection of the special monopod or tripod.

Acoustic sensor

Designed to receive acoustic signals in the sound and ultrasonic frequency range.

Microphone and amplifier are structurally combined in this sensor

Delivery Set

• Main unit
• Power supply
• Main unit s supporting device
• Main unit s shoulder holder
• USB cable
• Li pol acc. type 16650 (4 pcs)
• USB flash drive with software
• Wire line adapter+”RJ-45” cable +220V clips (2 units)+ GROUND wire+ Probes set +alligator clips+battery12V MN21(2ps.)
• SHF antenna detector
• Infrared sensor
• Testing device
• Magnetic field sensor
• Broadband UHF antenna
• Telescopic antenna
• RF wire line adapter+«F-BNC»
• Acoustic sensor
• Tripod
• Headphones