Edit Content

Register or Login:



The INT-FS002 solution is a surveillance kit consisting of three fiber scopes. These are generally used in low-noise drilling ops. Within the kit, the user will find two 1mm fiberscopes both 60 cm lenght, one 0° front view and one 65° side view. All fiberscopes are designed for pinhole installation. In addition, there is a 6mm non-conductive 60 cm fiberscope. The last one is often used for checking the progress of the drilling. Visual observation of the images is possible, or the user can utilize a tablet PC with the endoscope camera. Additionally, the INT-FS002 includes a pinhole 9mm diameter microphone kit with dedicated insertion tool. The kit also features tactical motion sensors that can be used to alert you of people approaching.

1mm Fiberscope

This instrument provides 0° front view. The user will have a direct view into a target room with a field of view of 60°. The 65° view direction version will complete the blind areas that can’t be seen by the 0° front view model. It is possible to rotate the 65° fiberscope, which will allow the inner surface of the wall to be seen and check for objects or people. Utilizing both the 0° and the 65° fiberscopes will provide coverage of the entire room.

Non-Conductive Fiberscope

This fiberscope is 6mm diameter and it includes internal illumination, as well as an positionable insertion tube. The user can check the progress of holes being drilled. Users might need to view changes in building materials at various stages. They might want to check the buildup of dust, and utilize it in the pinholing stage. The insertion tube is rugged thanks to a tough black plastic outer covering. This helps to reduce the sound of metal scratching.

The covering and tip are also non-conductive, which provides an added layer of safety when checking areas within walls. The LED light source provides operation with just 2 x AA cells. You can use the instrument visually, or connect it to the tablet PC with the endoscope camera.

Tablet PC

The Tablet PC has a compact screen of 8″, which is small enough to carry, but large enough to see the screen easily. It features a rugged design, as well. The unit is ruggedized to MIL-STD 810G and IP65 water/dust resistant. It also has a long battery life.

The device uses a USB3 port, so you can use the latest endoscope camera with this equipment. The software, which comes on the device, allows you to view the images.

You can adjust the viewing window size easily. Just drag the corner of the window to the desired area. Pinching the touchscreen allows for image zooming, or you can use the clicking +/- on the toolbar. The device features a range of other camera settings, so you can get the results you need regardless of the lighting conditions. You can save the settings, as needed.

Endoscope Camera

This endoscope camera is technologically superior and is operating with low light. It features a CMOS technology Sony IMX265 camera. The lens interface is C type mounting and fitted with our 35mm endoscope coupler.

The camera provides resolution of 2048 x 1536 pixels at 55 FPS. This exceeds the requirements when it comes to using a 1mm fiberscope. This ensures you are getting a top-quality image.

Camera settings include Gain, Gamma, Exposure, Brightness, Sharpness and Frame Rate. Thanks to the various settings, you can obtain video images even in low light without graininess and at full speed. You do not have to worry about stepped video delay.

Tactial Motion Sensors

The sensors are wireless and simple to use. They will send an alert signal to a receiver small enough to fit in the pocket. The alert is sent if an object the size of a human passes within three meters of the sensor. It is a simple and effective way at providing security during any covert op.

The device features two sensors in basic configuration. Optionally you can use up to four of the sensors with a single receiver though, and you can change out the types of sensors if you need to have different types of detection. For example, wide angle, remote head, or long range. A USB will charge the received, and the sensors utilize high drain lithium ½ AA cells.

Pinhole Microphone Kit

A 9mm diameter pinhole microphone with dedicated insertion and extraction tools. A two-piece (600mm length) rigid tool allows to push the microphone into a previously drilled hole. A strong wire complementing the bullet mic (in addition to the signal wire) helps the mic to be extracted from the wall. The kit also comes with a high quality amplifier with volume control, mic input and earphones output. The amplifier is charged via USB and comes with earbud type headphones.

This section contains confidential information. Access to such information is granted only to authorized government units/companies.
Please fill in the form below to receive the Login password for entering the restricted sections.
The username/password will be sent to your email indicated above at the nearest time possible. Once received, you can input these data at the upper Log In Tab of the current web-page and Get Full Access to all data.